Single-component dispensers
Pressure-type Liquid Transfer SystemShuttleflow
The tank for supply is unnecessary. It supplies directly from a material can.!!
This machine is the pump which supplies the material liquid of a pale can directly. It can be used also as a pump for a supplement / transfer of material liquid.
- Since the double action pump of a capacity measurement system is adopted, continuation discharge is possible.
- Adjustment of the amount of discharge is performed by the air pressure for a pump drive. (A flow regulator can be installed as an option.)
- In inside - quantity stickiness, a follow plate is installed.
Specifications
Pump ratio | 38:1 | 13:1 (custom model) |
---|---|---|
Pump type | Pull-up type (for medium and high viscosities) |
Suction type (for low and medium viscosities) |
Max. working discharge pressure |
19 MPa | 6.5 MPa |
Air supply pressure | 0.2 - 0.5 MPa | |
Liquid viscosity | 100,000 - 1,000,000 mPa・s | 1 - 200,000 mPa・s |
Max. Pump outlet discharge |
1.2 L/min (at 20 cpm) |
2.2 L/min (at 30 cpm) |
Suction type | Rubber plate | Ring plate or no plate |
Applicable Liquids
Applicable liquid | Epoxy, Silicone, Urethane, Oil, Grease, etc. |
---|